Remove Speed Sensor
WARNING: This page is about a different car, the 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the speed sensor connector.
- Remove the clamp bolt from the upper control bracket.
Torque: 13 N.m (130 kgf.cm, 9 ft.lbf)
- Remove the 6 resin clips, holding the sensor wire harness from the frame, upper control arm and axle housing.
- Remove the mounting bolt and speed sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
- Remove the O-ring from the speed sensor.