Input Shaft: Reassembly

WARNING: This page is about a different car, the 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Coat all of the sliding and rotating surfaces with gear oil before reassembly.

Install front ball bearing .
1. Using SST and a press, install a new front ball bearing.
  
  Fig 1: Installing New Front Ball Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  SST 09316-60011 (09316-00011)
2. Select a snap ring that will allow the minimum axial play.
  
  Fig 2: Displaying Snap Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Fig 3: Displaying Various Snap Ring Dimensions
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a snap ring expander, install a new snap ring.
Install rear ball bearing .
1. Using SST and a press, install the rear ball bearing.
  
  Fig 4: Installing Rear Ball Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  SST 09316-60011 (09316-00011, 09316-00031)
2. Select a snap ring that will allow the minimum axial play.
  
  Fig 5: Displaying Snap Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Fig 6: Identifying Snap Ring Thickness Specifications
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a snap ring expander, install a new snap ring.