Inspection Procedure
- Check courtesy switch
. See
STEP 3 - INSPECT PASSENGER'S DOOR KEY LOCK AND UNLOCK SWITCH
under
INSPECTION
.
- NG: Replace the courtesy switch.
- OK: Go to next step.
- Check that there is a grounding malfunction caused by looseness of the tighten screw.
- NG: Install screw.
- OK: Go to next step.
- Check wire harness and connector between courtesy switch and body ECU
. See
HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
.
- NG: Repair or replace wire harness or connector.
- OK: Go to next step.
Proceed to next circuit inspection shown on problem symptoms table . See PROBLEM SYMPTOMS TABLE .