Using Brake Pedal & Accelerator Pedal
- Insert registered master key in ignition lock cylinder. Within 15 seconds of inserting master key into ignition lock cylinder, depress and release accelerator pedal 4 times.
- Within 20 seconds of depressing and releasing accelerator pedal 4 times, depress and release brake pedal 5 times and remove master key from ignition lock cylinder.
- Within 10 seconds of removing master key from ignition lock cylinder, insert sub-key to be registered in ignition lock cylinder.
- Within 10 seconds of inserting sub-key in ignition lock cylinder, depress and release accelerator pedal one time. Ensure SECURITY indicator light flashes. SECURITY indicator light is located on A/C control panel.
- After one minute, additional sub-key should be registered and SECURITY indicator light should then turn off. If registering additional sub-keys, repeat process starting with step 3 within 10 seconds.
- The registration mode is complete after removing sub-key from ignition lock cylinder within 10 seconds and brake pedal is depressed, or SECURITY indicator light has turned off for at least 10 seconds.