Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Power Steering Vane Pump (2AZ-FE) | ||||
| Vane Pump Housing Rear At Vane Pump Housing Front | 16 (22) | |||
| Pressure Point Union | 51 (69) | |||
| Suction Port Union Set Bolt | 9 (12) | |||
| Power Steering Oil Pressure Switch | 15 (21) | |||
| Pressure Feed Tube Assembly At Vane Pump Assembly | 38 (51.5) | |||
| Vane Pump Assembly Set Bolt | ||||
| Bolt A With SST | 22 (30) | |||
| Bolt A Without SST | 32 (43) | |||
| Bolt B | 32 (43) | |||
| Power Steering Vane Pump (1MZ-FE) | ||||
| Vane Pump Housing Rear At Vane Pump Housing Front | 18 (24) | |||
| Pressure Point Union | 61 (83) | |||
| Suction Port Union Set Bolt | 10 (13) | |||
| Pump Bracket Front At Pump Bracket Rear | ||||
| Type A Vane Pump | 32 (43) | |||
| Type B Vane Pump | 32 (44) | |||
| Vane Pump Pulley Set Nut | 32 (44) | |||
| Vane Pump Assembly Set Bolt | 32 (43) | |||
| Pressure Feed Tube Assembly At Vane Pump Assembly | 38 (51.5) | |||
| Power Steering Oil Pressure Switch | 15 (21) | |||
| Power Steering Gear | ||||
| Control Valve Housing Set Bolt | 15 (21) | |||
| Control Valve Shaft Lock Nut | 18 (24.5) | |||
| Rack Housing Cap | 43 (58.5) | |||
| Rack Guide Spring Cap Lock Nut | ||||
| With SST | 35 (48) | |||
| Without SST | 51 (68.5) | |||
| Power Steering Rack At Rack End | ||||
| With SST | 35 (48) | |||
| Without SST | 51 (68.5) | |||
| Tie Rod Assembly Lock Nut | 55 (74) | |||
| Turn Pressure Tube Union Nut | ||||
| With SST | 8 (11.5) | |||
| Without SST | 9 (12.5) | |||
| Rack & Pinion Power Steering Gear Assembly Set Bolt And Nut | 52 (70) | |||
| Pressure Feed And Return Tubes At Control Valve Housing | ||||
| With SST | 17 (22.5) | |||
| Without SST | 18 (24.5) | |||
| Front Stabilizer Bracket | 14 (19) | |||
| Stabilizer Link Assembly Set Nut | 55 (74) | |||
| Tie Rod Assembly Set Nut | 36 (49) | |||
| Intermediate Shaft Sub-Assembly At Control Valve Shaft | 26 (35.3) | |||
| Hub Nut | 76 (103) | |||
| INCH Lbs. (N.m) | ||||
| Pressure Feed Tube Clamp Set Bolt | 86 (9.8) | |||
| Return Tube Assembly Clamp Set Nut | 86 (9.8) | |||