Power Steering Fluid: Bleeding
- Check fluid level. See INSPECTION .
- Jack up front of vehicle and support it with stands .
- Turn steering wheel
:
With the engine stopped, turn the wheel slowly from lock to lock several times.
- Lower vehicle .
- Start engine
:
Run the engine at idle for a few minutes.
- Turn steering wheel
:
- With the engine idling, turn the wheel to left or right full lock position and keep it there for 2 - 3 seconds, then turn the wheel to the opposite full lock position and keep it there for 2 - 3 seconds.
- Repeat (a) several times.
- Stop engine .
- Check for foaming or emulsification
:
If the system has to be bled twice specifically because of foaming or emulsification, check for fluid leaks in the system.
- Check fluid level. See INSPECTION .