LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2002 >> 4Runner Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Blower Unit >> Removal

Blower Unit: Removal

  1. Remove Glove Compartment Door 
  2. Remove Glove Compartment Reinforcement 
  3. Remove No. 2 Instrument Panel Lower Finish Panel 
  4. Remove No. 4 Heater To Register Duct 
  5. Remove Front Door Scuff Plate Rh 
  6. Remove Cowl Side Trim Rh 
  7. Remove Cooling Unit (See  REMOVAL  ) 
  8. Remove Blower Unit 
    1. Disconnect the connector from the blower motor.
    2. Disconnect the air inlet damper control cable from the blower unit.
      NOTE: After connection, adjust the control cable.
    3. Remove the nut, bolt and blower unit.
scientia non olet · About LEMON Manuals