Section 2 (Cruise Control Systems - 4.7L): Operation: Notes

WARNING: This page is about a different variant/trim than selected.

Cruise control is operated by a switch located on lever to right side of steering column. Depressing cruise ON-OFF (main) button at end of lever turns system on. CRUISE indicator light in instrument cluster comes on when desired cruising speed is set. To set desired speed, move control lever downward in SET/COAST direction and release it. Desired speed should be maintained. Press cruise ON-OFF (main) switch again to turn cruise control system off.

Set speed may be cancelled by pulling cruise control lever toward steering wheel which activates CANCEL switch, pressing brake pedal, pressing clutch pedal (M/T) or placing shift lever in Neutral (A/T). If vehicle speed decreases 10 MPH less than set speed or vehicle speed drops to less than 25 MPH, set speed will automatically cancel. If Electronic Control Module (ECM) detects a system malfunction, set speed will automatically cancel and CRUISE indicator light will flash several times.

Moving cruise control lever in RES/ACC (resume/accelerate) direction allows vehicle to return to speed set before cancellation. Holding cruise control lever in RES/ACC (resume/accelerate) direction gradually increases vehicle speed. Holding cruise control lever in SET/COAST direction gradually decreases vehicle speed. If cruise control switch is moved to RES/ACC or SET/COAST and released, set speed will change one MPH.