LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sequoia Limited, 4WD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Systems >> Component Tests >> Back Door Power Window Switch

Back Door Power Window Switch

  1. Back door power window switch is located at driver's side of instrument panel. See Fig 1. Disconnect electrical connector at back door power window switch.
  2. Note electrical terminal identification on back door power window switch. See Fig 1. Using ohmmeter, check that continuity exists between electrical terminals No. 3 and 6 with switch in UP position, and that continuity exists between electrical terminals No. 3 and 5 with switch in DOWN position. Replace back door power window switch if continuity is not as specified.
    Fig 1: Locating & Identifying Electrical Terminals On Back Door Power Window Switch
    G00023109Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals