Rear Brake Speed Sensor: Removal

1. Remove the seat cushion and rear side trim.
2. Disconnect the speed sensor connector.
   Fig 1: Disconnecting Speed Sensor Connector

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 3 clamp bolts holding the sensor wire harness to the body and suspension arm.

   Torque: 

   To body: 5.0 N.m (52 kgf.cm, 41 in..lbf) 

   To suspension arm: 19 N.m (194 kgf.cm, 14 ft.lbf) 

Remove Speed Sensor With Axle Hub (See  REMOVAL (RAV4)  ) 

Remove Speed Sensor 

Remove the bolt and speed sensor from the axle carrier.

Fig 2: Removing 4WD Speed Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 8.0 N.m (82 kgf.cm, 71 in..lbf)