LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> RAV4 Base, FWD, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans Overhaul >> Component Disassembly & Reassembly >> Shift & Select Lever >> Disassembly

Shift & Select Lever: Disassembly

  1. Using a pin punch and hammer, drive out roll pin from No. 2 shift inner lever. Remove snap ring. Remove No. 2 select spring seat, No. 2 spring and No. 2 shift inner lever. Drive out roll pin from No. 1 shift inner lever. Remove shift interlock plate and No. 1 shift inner lever from shaft.
  2. Remove No. 1 compression spring and No. 1 select spring seat. Remove snap ring. Remove control shaft cover. If necessary, replace control shaft cover oil seal. Drive in NEW oil seal to a depth of 0-.020" (0-.51 mm). Apply multipurpose grease to oil seal. See Figure.
scientia non olet · About LEMON Manuals