Connecting Rods Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Toyota Sienna, 2001 Toyota Highlander, 2001 Toyota Camry Solara, 2001 Toyota Camry, and 2001 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTING RODS
| Application | In. (mm) | |||||
|---|---|---|---|---|---|---|
| Bore Diameter | ||||||
| Crankpin Bearing Center Wall Thickness (1) | ||||||
| Avalon, Highlander & Sienna | ||||||
| Size Mark 1 | .0584-.0585 (1.484-1.487) | |||||
| Size Mark 2 | .0585-.0587 (1.487-1.490) | |||||
| Size Mark 3 | .0587-.0588 (1.490-1.493) | |||||
| Size Mark 4 | .0588-.0589 (1.493-1.496) | |||||
| Camry & Camry Solara | ||||||
| Size Mark 1 | .0584-.0586 (1.484-1.488) | |||||
| Size Mark 2 | .0586-.0587 (1.488-1.492) | |||||
| Size Mark 3 | .0587-.0589 (1.492-1.496) | |||||
| Pin Bushing Bore | .8663-.8667 (22.004-22.014) | |||||
| Maximum Bend | .0020 Per 3.94 (.050 Per 100) | |||||
| Maximum Twist | .0059 Per 3.94 (.150 Per 100) | |||||
| Side Play | ||||||
| Standard | .0059-.0118 (.149-.299) | |||||
| Wear Limit | .0138 (.350) | |||||
|
||||||