Heater Control Assembly: Installation
- To install, reverse removal procedure. Place air inlet control lever on heater control assembly to RECIR position. Set temperature control dial on heater control assembly to MAX COOL position and mode control dial on heater control assembly to FACE position.
- Place air inlet damper control lever in RECIRC position and connect air inlet damper control cable to the pin and lock the clamp while lightly pulling the control cable outer housing in the direction indicated. Perform STEP 1 in illustration. See Fig 2.
- Place air mix damper control lever in MAX COOL position and connect air mix damper control cable to the pin and lock the clamp while lightly pulling the control cable outer housing in the direction indicated. Perform STEP 2 in illustration. See Fig 2.
- Place air outlet damper control lever in FACE position and connect mode control cable to the pin and lock the clamp while lightly pulling the control cable outer housing in the direction indicated. Perform STEP 3 in illustration. See Fig 2. To install remaining components, reverse removal procedure.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002