Blower Motor Circuit
WARNING: This page is about a different car, the 2001 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Remove blower motor. See BLOWER UNIT under REMOVAL & INSTALLATION. Apply battery voltage to motor. If blower motor runs, go to next step. Replace blower motor if it does not run. Check wiring between blower motor and battery, and between blower motor and ground. Repair wiring as necessary. If wiring is okay, check wiring between blower motor linear controller and A/C-heater controller. See WIRING DIAGRAMS . Repair wiring as necessary.