LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Highlander Base, 3.0 F, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Controls - Service & Adjustment Specifications) >> Fuel Systems >> Throttle Position Sensor >> Throttle Position Sensor Resistance Specifications (MR2)

Throttle Position Sensor Resistance Specifications (MR2)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (MR2)

Throttle Position Terminals Ohms
Models With Standard Type Manual Transaxle (1)
Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
..... VC & E2 2500-5900
Models With Sequential Manual Transaxle Transaxle (1)
.... VC & E2 (2) 1200-3200
(1) There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. Standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. Sequential manual transaxle is an electronic controlled manual transaxle in which clutch is operated and transaxle is shifted hydraulically by moving shift lever forward or backward. Sequential manual transaxle may be identified by shift lever pattern which consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used.
(2) Resistance at 68°F (20°C).
scientia non olet · About LEMON Manuals