LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> 4Runner Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 378 (Introduction) >> Precautions For All Of Vehicles >> For Using OBD II SCANTOOL Or TOYOTA Hand-Held Tester

For Using OBD II SCANTOOL Or TOYOTA Hand-Held Tester

WARNING: This page is about a different car, the 2002 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Observe the following for safety reasons:

  • Before using the OBD II SCANTOOL or TOYOTA hand-held tester, the OBD II scan tool's instruction book or TOYOTA hand-held tester's operator manual should be read thoroughly.
  • Be sure to route all cables securely when driving with the OBD II scan tool or TOYOTA hand- held tester connected to the vehicle. (i.e. Keep cables away from feet, pedals, steering wheel and shift lever).
  • Two persons are required when test driving with the OBD II scan tool or TOYOTA hand-held tester, one person to drive the vehicle and one person to operate the OBD II scan tool or TOYOTA hand-held tester.