Section 350 (Air Conditioning): Specifications

WARNING: This page is about a different car, the 2002 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

SPECIFICATIONS

Application

Specification

Compressor Type

⁽¹⁾

Compressor Belt Tension ⁽²⁾

New Belt

135-185 lbs. (61-84 kg)

Used Belt ⁽³⁾

80-120 lbs. (36-54 kg)

Compressor Oil Capacity ⁽⁴⁾

⁽¹⁾

Condenser Oil Capacity ⁽⁴⁾

1.4 ozs.

Evaporator Oil Capacity ⁽⁴⁾

1.4-1.7 ozs.

Receiver Oil Capacity ⁽⁴⁾

.7oz.

Refrigerant (R-134a) Capacity

21.2-24.7 ozs.

System Operating Pressures ⁽⁵⁾

High Side

199-228 psi (14-16 kg/cm² )

Low Side

21-36 psi (1.5-2.5 kg/cm² )

⁽¹⁾	Information is not available from manufacturer.

⁽²⁾	Use belt tension gauge for checking compressor belt tension.

⁽³⁾	Used belt is a belt that has been in operation at least 5 minutes.

⁽⁴⁾	Use ND-OIL 8 refrigerant oil or equivalent.

⁽⁵⁾	With ambient temperature at 86-95°F (30-35°C) at air inlet with switch in RECIRC position, engine at 1500 RPM, blower switch in HI position and temperature control dial in COOL position.