LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> 4Runner Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Back Door Control System - Diagnostics >> Circuit Inspection >> Rear Wiper Limit Switch Circuit >> Inspection Procedure

Inspection Procedure

  1. Check rear wiper motor continuity ( ). 
    1. NG: Replace rear wiper motor. 
    2. OK: Go to next step. 
  2. Check harness and connector between rear wiper motor and back door ECU ( ). 
    1. NG: Repair or replace harness or connector. 
    2. OK: Proceed to next circuit inspection shown on problem symptoms table (See  PROBLEM SYMPTOMS TABLE  ). 
scientia non olet · About LEMON Manuals