Timing Belt: Remove & Replace
WARNING: This page is about the Tundra Base, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| V6,Automatic Trans, w/Air Cond | 3.3 | 1.8 | B | |
| V6,Automatic Trans, w/o Air Cond | 2.9 | 1.8 | B | |
| Combination Procedure: CAMSHAFT GEAR OR SPROCKET: Remove & Replace: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: CAMSHAFT OIL SEAL: Remove & Replace: | ||||
| V6, Both | 1.0 | B | ||
| V6, One | 0.8 | B | ||
| Combination Procedure: CRANKSHAFT GEAR OR SPROCKET: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: CRANKSHAFT OIL SEAL: Remove & Replace: | ||||
| Front | 0.3 | B | ||
| Combination Procedure: TIMING BELT IDLER PULLEY: Remove & Replace: | ||||
| Each | 0.1 | B | ||
| Combination Procedure: TIMING BELT TENSIONER PULLEY: Remove & Replace: | ||||
| 0.1 | B | |||
| Combination Procedure: WATER PUMP: Remove & Replace: | ||||
| V6 | 0.3 | B | ||