Park/Neutral Switch
NOTE:
Park/Neutral switch may also be referred to as Park/Neutral Position (PNP) switch.
- Check if engine can be started with shift lever only in "N" or "P" positions. If adjustment is needed, loosen park/neutral switch retaining bolt(s). Position gearshift in Neutral. Align neutral line on park/neutral switch with groove on shaft. See Fig 1 or Fig 2 .
- Hold park/neutral switch in this position and tighten retaining bolt to specification. See TORQUE SPECIFICATIONS . Ensure vehicle only starts with shift lever in "P" or "N" position.