LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> RAV4 Base, AWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Mechanical) >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

WARNING: This page is about a different car, the 2000 Toyota Tundra, 2000 Toyota Land Cruiser, 2000 Lexus LX 470, 1999 Toyota Land Cruiser, and 1999 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS . Ensure reference marks on drive shaft flanges are aligned. If removed, apply Loctite to threads of flywheel/drive plate bolts before installing. Tighten flywheel/drive plate bolts to specification in a crisscross pattern. See TORQUE SPECIFICATIONS . If torque converter bolts were removed, apply Loctite to bolt threads before installing. Install Black torque converter bolt before installing any other torque converter bolts.
  2. Apply light coat of engine oil to tip of pipe on fuel filter to allow for ease of disconnect fitting, and fuel inlet hose installation. Using NEW retainer, install fuel inlet hose on fuel filter until "click" sound is heard. DO NOT reuse old retainer. Pull on fuel inlet hose to ensure fuel inlet hose is properly locked on fuel filter.
  3. Use NEW gaskets when installing transfer case shift lever and front exhaust pipes. Install remaining components. Fill and bleed cooling system. See COOLING SYSTEM BLEEDING .
scientia non olet · About LEMON Manuals