LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> RAV4 Base, AWD, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Adjustments >> Brake Pedal Height

Brake Pedal Height

  1. Remove instrument panel lower finish panel. Brake pedal height is measured from face of brake pedal pad to asphalt sheet under carpet. See Fig 1.
  2. Brake pedal height should be 6.19-6.58" (157.2-167.2 mm). To adjust brake pedal height, disconnect stoplight switch connector. Loosen stoplight switch lock nut and remove switch. Loosen lock nut on brake pedal push rod. Adjust pedal height by turning push rod.
  3. After adjusting brake pedal height, tighten push rod lock nut. Adjust stoplight switch. See STOPLIGHT SWITCH . Check and adjust brake pedal free play. See BRAKE PEDAL FREE PLAY .
Fig 1: Measuring Pedal Height
G96C19689Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals