LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> RAV4 Base, AWD, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Locks >> Component Testing >> PTC Thermistor >> Land Cruiser

Land Cruiser

  1. Connect negative lead from battery to door lock actuator terminal No. 2. Connect positive lead from ammeter to door lock actuator terminal No. 3 and negative ammeter lead to positive battery terminal. See Figure. Current should change from 3.2 amps to less than 0.5 amps within 20-70 seconds.
  2. Wait approximately 60 seconds and connect positive lead from battery to terminal No. 2 and negative lead to terminal No. 3. Door lock actuator should move to LOCK position. If operation is not as specified, replace door lock actuator assembly.
scientia non olet · About LEMON Manuals