LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> MR2 >> Repair and Diagnosis >> Suspension >> Front Suspension System >> Removal & Installation >> Stabilizer Bar >> Installation

Stabilizer Bar: Installation

NOTE: Install the bushing so that the cutout will face to the rear. The distance between the bushings is 832 mm.
  1. Install the two bolts, bracket and bushing, and install stabilizer bar. See TORQUE SPECIFICATIONS .
  2. Install the nut, stabilizer bar link, three retainers and two cushions. See TORQUE SPECIFICATIONS .
  3. Install the stabilizer bar link to the stabilizer bar and torque the nut. See TORQUE SPECIFICATIONS .
  4. Install the front wheel. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals