LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> MR2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Starting System) >> On-Vehicle Testing >> Starter Relay Test >> Land Cruiser

Land Cruiser

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locate and remove starter relay. Starter relay is marked "ST". See STARTER RELAY LOCATION  table. Using ohmmeter, verify continuity exists between relay terminals No. 3 and 4. See STEP 1. See Figure. Continuity should not exist between terminals No. 1 and 2. If continuity is not as specified, replace relay.
  2. Check relay operation by applying battery voltage to terminals No. 3 and 4. See STEP 2. See Figure. Continuity should now exist between terminals No. 1 and 2. If relay does not test as indicated, replace relay.
scientia non olet · About LEMON Manuals