LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> MR2 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer Systems >> Component Tests >> Key Unlock Warning Switch

Key Unlock Warning Switch

  1. Disconnect 2-pin connector for key unlock warning switch. Key unlock warning switch is located near ignition switch. See Figure.
  2. Connect ohmmeter between terminals on key unlock warning switch. Check that no continuity exists with ignition key removed from ignition lock cylinder. Check that continuity exists with ignition key installed in ignition lock cylinder. Replace key unlock warning switch if defective.
scientia non olet · About LEMON Manuals