Camry (With Anti-Theft System)

Locate integration relay on junction block (behind instrument panel, left of steering column). Measure voltage by backprobing between integration relay 25-pin connector terminal No. 3 (Pink wire) and ground. See Fig 1. Turn ignition switch to LOCK position.
Observe voltmeter and close driver's door. Battery voltage should be present. Open driver's door. Voltage should be zero volts. Observe voltmeter and turn ignition switch to RUN position. Battery voltage should be present. If voltage is not as specified, replace integration relay and retest.

Fig 1: Testing Integration Relay (Camry - With Anti-Theft System)