LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Wiper System & Washer System) >> Component Tests >> Front Wiper/Washer Switch Test

Front Wiper/Washer Switch Test

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1999 Toyota Tacoma, 1999 Toyota Sienna, 1999 Toyota RAV4, 1999 Toyota Land Cruiser, and 1999 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

With wiper switch in specified position, ensure continuity exists between specified terminals. See WIPER/WASHER SWITCH CONTINUITY TEST  table. See Fig 1. Replace wiper switch assembly if continuity is not as specified.

WIPER/WASHER SWITCH CONTINUITY TEST

Switch Position (1) Terminals No.
Avalon, Camry, Camry Solara, Celica, RAV4 & Sienna
Off 7 & 16
Intermittent 7 & 16
Low 7 & 17
High 8 & 17
Washer On 2 & 11
Corolla
With Mist Wiper
Off 7 & 16
Mist 3 & 11
Low 7 & 17
High 8 & 17
Washer On 2 & 11
With Intermittent Wiper
Off 7 & 16
Intermittent 7 & 16
Low 7 & 17
High 8 & 17
Washer On 2 & 11
Land Cruiser & Lexus LX470
Off 7 & 16
Intermittent 7 & 16
Low 7 & 17
High 8 & 17
Washer OFF None
Washer ON 2 & 11
Tacoma, Tundra & 4Runner
With Mist Wiper
Off 7 & 16
Mist 7 & 17
Low 7 & 17
High 8 & 17
Washer On 2 & 11
With Intermittent Wiper
Off 7 & 16
Intermittent 7 & 16
Low 7 & 17
High 8 & 17
Washer On 2 & 11
(1) See Fig 1.
Fig 1: Identifying Combination Switch Connectors For Wipers/Washers
G98C10852Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002