Power Window Switch Continuity Test (Back Door/Tailgate): 4Runner

WARNING: This page is about a different car, the 1999 Toyota Tacoma, 1999 Toyota Sienna, 1999 Toyota RAV4, 1999 Toyota Land Cruiser, and 1999 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

Using an ohmmeter, check continuity between specified terminals with back door/tailgate power window switch in specified position. See POWER WINDOW SWITCH CONTINUITY TEST (4RUNNER - BACK DOOR/TAILGATE) table. See Figure. If continuity does not exist at specified terminals, replace appropriate power window switch.

POWER WINDOW SWITCH CONTINUITY TEST (4RUNNER - BACK DOOR/TAILGATE)

Application & Position

⁽¹⁾ Terminals No.

2 & 6

OFF

None

DOWN

1 & 6

Switch Illumination

UP, OFF & DOWN

5 & 8

⁽¹⁾	See Figure.