Power Window Switch Ground Test

NOTE: Testing for Land Cruiser, Tacoma and RAV4 is not available.

Disconnect power window switch connector. Check for continuity between appropriate power window switch harness connector terminal and ground. See POWER WINDOW SWITCH GROUND TEST table. Continuity should be present at all times. If continuity is not present, repair open in ground circuit.

POWER WINDOW SWITCH GROUND TEST

Application & Switch

Terminals No.

Sienna

Driver Power Window Master Switch ⁽¹⁾

Rear Quarter Power Window Switch ⁽²⁾

6 & 9

Tundra

Driver Power Window Master Switch ⁽¹⁾

4Runner

Driver Power Window Master Switch ⁽³⁾

Passenger Power Window Switch ⁽⁴⁾

⁽¹⁾	For switch terminal location, see Figure.

⁽²⁾	For switch terminal location, see Figure.

⁽³⁾	For switch terminal location, see Figure.

⁽⁴⁾	For switch terminal location, see Figure.