Adjusting Method For Jam Protection
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2000 Toyota Tundra, 2000 Toyota Tacoma, 2000 Toyota Sienna, 2000 Toyota RAV4, and 2000 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Use this procedure when power window motor has been replaced or when power window motor has been run while removed from vehicle.
To adjust limit switch to OFF position, connect motor to harness connector and operate power window motor in UP direction for 4-5 seconds. This sets limit switch to full UP position (OFF).