LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> Tercel Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Tests >> Integration Relay Test >> Camry (With Anti-Theft System)

Camry (With Anti-Theft System)

  1. Locate integration relay. See INTEGRATION RELAY LOCATION  table. Backprobing connector, connect voltmeter positive lead to terminal No. 3 at integration relay 25-pin connector. See Figure. Connect voltmeter negative lead to ground. Turn ignition switch to LOCK position.
  2. Observe voltmeter and close driver's door. Battery voltage should be present. Open driver's door. Voltage should be zero volts. Observe voltmeter and turn ignition switch to ON position. Battery voltage should be present. If voltage is not as specified, replace integration relay and retest.
scientia non olet · About LEMON Manuals