Torque Specifications: Tercel
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS (TERCEL)
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Accessory Drive Pulley-To-Crankshaft Pulley Bolt | 14 (19) | ||
| Crankshaft Pulley Bolt | 114 (155) | ||
| ECT Sensor | (1)* | ||
| Front (Timing Belt End) Engine Mount Through-Bolt | 54 (73) | ||
| Front (Timing Belt End) Engine Mount-To-Mounting Bracket Bolt | 47 (64) | ||
| Fuel Inlet Hose-To-Fuel Rail Union Bolt | 22 (30) | ||
| Fuel Outlet Line-To-Fuel Pump Mounting Bracket Union Bolt | 22 (30) | ||
| Fuel Rail-To-Cylinder Head Bolt | 14 (19) | ||
| Knock Sensor | 33 (45) | ||
| Oxygen Sensor-To-Exhaust Manifold | 32 (43) | ||
| Oxygen Sensor-To-Exhaust Pipe | 32 (43) | ||
| Throttle Body Bolt/Nut | 15 (20) | ||
| Wheel Lug Nut | 76 (103) | ||
| INCH Lbs. (N.m) | |||
| Camshaft Position Sensor Bolt | 71 (8.0) | ||
| Control Lever Nut | 115 (13.0) | ||
| Crankshaft Position Sensor Bolt | 71 (8.0) | ||
| Fuel Pressure Regulator Retaining Screw | 18 (2.0) | ||
| Fuel Pump Mounting Bracket-To-Fuel Tank Bolt | 31 (3.5) | ||
| Ignition Coil Retaining Bolt | 75 (8.5) | ||
| PNP Switch Retaining Bolt | 48 (5.4) | ||
| PNP Switch Retaining Nut | 61 (6.9) | ||
|
|||