Torque Specifications: Corolla
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS (COROLLA)
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| ECT Sensor | (1)* | ||
| Fuel Rail-To-Cylinder Head Bolt | 14 (19) | ||
| Intake Manifold Bolt/Nut | 14 (19) | ||
| Intake Manifold Support Bolt | 14 (19) | ||
| Knock Sensor | 29 (39) | ||
| Oxygen Sensor-To-Exhaust Pipe | 32 (43) | ||
| Oxygen Sensor-To-Exhaust Pipe Retaining Nut | 32 (43) | ||
| Power Steering Pressure Switch | 15 (20) | ||
| Throttle Body Bolt/Nut | 15 (20) | ||
| Vehicle Speed Sensor Retaining Bolt | 12 (16) | ||
| INCH Lbs. (N.m) | |||
| Camshaft Position Sensor Bolt | 80 (9.0) | ||
| Control Lever Nut | 115 (13.0) | ||
| Crankshaft Position Sensor Bolt | 80 (9.0) | ||
| Fuel Pipe Clamp-To-Cylinder Head Bolt | 80 (9.0) | ||
| Fuel Pump Retaining Plate-To-Fuel Tank Bolt | 35 (4.0) | ||
| Ignition Coil Retaining Bolt/Nut | 80 (9.0) | ||
| PNP Switch Retaining Bolt | 48 (5.4) | ||
| PNP Switch Retaining Nut | 61 (6.9) | ||
|
|||