Torque Specifications: CAMRY
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS (CAMRY)
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| A/F Sensor | 32 (43) | |||
| Crankshaft Pulley Bolt | 80 (109) | |||
| ECT Sensor | (1)* | |||
| Front (Timing Belt End) Engine Mount Bracket-To-Cylinder Block Bolt | 38 (52) | |||
| Front (Timing Belt End) Engine Mount Support Rod-To-Body Bolt | 47 (64) | |||
| Front (Timing Belt End) Engine Mount Support Rod-To-Engine Mount Bracket Bolt | 47 (64) | |||
| Fuel Pulsation Damper | 25 (34) | |||
| Ignition Coil Mounting Bracket Bolt | ||||
| Large Bolt | 31 (42) | |||
| Small Bolt | 15 (20) | |||
| Knock Sensor | 32 (43) | |||
| Oxygen Sensor-To-Exhaust Manifold | 32 (43) | |||
| Oxygen Sensor-To-Exhaust Pipe | 32 (43) | |||
| Power Steering Pressure Switch | 15 (20) | |||
| Throttle Body Bolt | 14 (19) | |||
| Valve Cover Nut | 33 (45) | |||
| Vehicle Speed Sensor Retaining Bolt | 12 (16) | |||
| Wheel Lug Nut | 76 (103) | |||
| INCH Lbs. (N.m) | ||||
| Camshaft Position Sensor Bolt | 84 (9.5) | |||
| Control Lever Nut | 115 (13.0) | |||
| Crankshaft Position Sensor Bolt | 84 (9.5) | |||
| EGR Pipe-To-EGR Valve Bolt | 89 (10.1) | |||
| EGR Valve Retaining Nut | 118 (13.3) | |||
| Fuel Pressure Regulator Retaining Screw | 18 (2.0) | |||
| Fuel Pump Protector Cover Bolt | 35 (4.0) | |||
| Fuel Pump Retaining Plate-To-Fuel Tank Bolt | 35 (4.0) | |||
| Fuel Rail-To-Cylinder Head Bolt | 115 (13.0) | |||
| Ignition Coil-To-Ignition Coil Mounting Bracket Bolt | 87 (9.8) | |||
| PNP Switch Retaining Bolt | 48 (5.4) | |||
| PNP Switch Retaining Nut | 61 (6.9) | |||
| Round Fuel Filter Retaining Screw | 18 (2.0) | |||
|
||||