LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> T100 Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Park/Neutral Switch

Park/Neutral Switch

NOTE: Park/neutral switch may also be referred to as Park/Neutral Position (PNP) switch.
  1. Loosen park/neutral switch retaining bolt(s). Position gearshift in Neutral. Align neutral line on park/neutral switch with groove on shaft. See Fig 1.
  2. Hold park/neutral switch in this position and tighten retaining bolt to specification. Ensure vehicle only starts with gearshift in Park or Neutral.
Fig 1: Adjusting Park/Neutral Switch (Typical)
G96C19267Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals