Land Cruiser
- Apply parking brake. Loosen control rod nut on control rod at control shaft lever on side of transmission. See Fig 1. Rotate control shaft lever fully counterclockwise toward rear of vehicle to Park position.
- Rotate control shaft lever clockwise 2 notches to Neutral position. Ensure gearshift is in Neutral. While holding control shaft lever slightly counterclockwise toward Reverse position, tighten control rod nut.
- Start engine. Ensure vehicle moves forward when shifting gearshift from Neutral to Drive, and rearward when shifting to Reverse.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002