LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> T100 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - 4-CYL >> Engine Sensors & Switches >> Throttle Position Sensor >> Tercel

Throttle Position Sensor: Tercel

  1. Ensure ignition is off. Disconnect electrical connector from TP sensor on throttle body. Note terminal identification. See Figure. On A/T models, disconnect throttle cable from linkage before checking TP sensor.
  2. On all models, use ohmmeter to check resistance between specified terminals in relation to throttle position. See TP SENSOR RESISTANCE SPECIFICATIONS (TERCEL - 1.5L)  table. Replace components as necessary if resistance is not within specification.
scientia non olet · About LEMON Manuals