Throttle Body: Installation

To install, reverse removal procedure using NEW gaskets. Tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS . Fill cooling system.

Fig 1: Accelerator Position Sensor Retaining Screw Installation Sequence & Positioning Of Tabs On Washer Plate (Non-Turbo)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Connecting Scan Tool

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Rotating Throttle Control Motor & Installing Retaining Screw "A" (Non-Turbo)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 4: Installing TP Sensor (Non-Turbo)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

To install, reverse removal procedure using NEW gasket. Tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS . Fill cooling system.