LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1997 >> Previa LE, RWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> On-Vehicle Testing >> Starter Relay Test

Starter Relay Test

  1. Remove starter relay, located behind instrument cluster panel, bottom right relay of 4 relay panel. Using ohmmeter, verify continuity between relay terminals No. 1 and 3. See Fig 1. Continuity should not exist between terminals No. 2 and 4. If continuity is not as indicated, replace relay.
  2. Check relay operation by applying battery voltage through terminals No. 1 and 3. See Fig 1. Continuity should now exist between terminals No. 2 and 4. If relay does not test as indicated, replace relay.
Fig 1: Testing Starter Relay
G92F01587Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals