LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1997 >> Corolla Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Adjustments >> Brake Pedal Height

Brake Pedal Height

  1. Remove instrument lower finish panel and air duct (if necessary). Brake pedal height is measured from face of brake pedal pad to asphalt sheet under carpet. See Figure.
  2. Brake pedal height should be 5.654-6.047" (143.6-153.6 mm). To adjust brake pedal height, loosen stoplight switch and lock nut on brake pedal push rod. Adjust pedal height by turning push rod.
  3. After adjusting brake pedal height, tighten push rod lock nut. Adjust stoplight switch. See STOPLIGHT SWITCH. Check and adjust brake pedal free play. See BRAKE PEDAL FREE PLAY .
scientia non olet · About LEMON Manuals