Section 2 (Engine Controls - Specifications - 2.2L): Capacities
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Some transaxles require that differential be filled separately from transaxle. A separate quantity of lubricant is required for differential. See FLUID CAPACITIES
table.
FLUID CAPACITIES
| Application | (1) Quantity | |||||
|---|---|---|---|---|---|---|
| Crankcase (Includes Filter) | 4.1 Qts. (3.9L) | |||||
| Cooling System (Includes Heater) | ||||||
| A/T | 7.5 Qts. (7.1L) | |||||
| M/T | 7.1 Qts. (6.7L) | |||||
| Manual Transaxle | ||||||
| (SAE 75W-90/API GL-5) | 2.7 Qts. (2.6L) | |||||
| Automatic Transaxle (Dexron-III) | ||||||
| Dry Refill | 5.9 Qts. (5.6L) | |||||
| Drain & Refill | 2.6 Qts. (2.5L) | |||||
| Differential (Dexron-III) A/T (2) | 1.7 Qts. (1.6L) | |||||
|
||||||