Abs Solenoid Relay
Remove ABS solenoid relay from underhood relay box. See Figure. Check continuity between specified terminals on relay. See ABS SOLENOID RELAY CONTINUITY table. Replace as needed. If relay is okay, go to next step.
ABS SOLENOID RELAY CONTINUITY
| Terminal No. (1) | Continuity | |||
|---|---|---|---|---|
| Static Test | ||||
| 1 & 3 | No | |||
| 2 & 3 | Yes | |||
| 4 & 6 | Yes (80 ohms) | |||
| 5 & 3 | Yes | |||
| 3 & 5 (Reversed) | No | |||
| Battery Voltage Applied To Terminals No. 4 & 6 | ||||
| 1 & 3 | Yes | |||
| 2 & 3 | No | |||
|
||||