LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1997 >> 4Runner Base, RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Controls - Remove/Install/Overhaul - 3.4L) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Air Intake Chamber Bolt/Nut 13 (18)
ECT Sensor 15 (20)
Fuel Crossover Pipe Union Bolt 25 (34)
Fuel Inlet Pipe Union Bolt 25 (34)
Heated Oxygen Sensor Nut 15 (20)
Intake Air Connector Bolt/Nut 13 (18)
Intake Manifold Bolt/Nut 13 (18)
Intake Manifold Support Brace Bolt 13 (18)
Knock Sensor 29 (39)
Throttle Body Bolt/Nut 13 (18)
INCH Lbs. (N.m) 
Airflow Meter Retaining Bolt 61 (6.9)
Camshaft Position Sensor Bolt 69 (7.8)
Coolant Bypass Pipe-To-Cylinder Block Bolt/Nut 75 (8.5)
Crankshaft Position Sensor Bolt 69 (7.8)
Fuel Pressure Regulator Bolt 71 (8.0)
Fuel Pump Mounting Bracket-To-Fuel Tank Bolt 31 (3.5)
Fuel Rail-To-Intake Manifold Bolt 115 (13.0)
Ignition Coil Bolt 69 (7.8)
PNP Switch Retaining Bolt 115 (13.0)
PNP Switch Retaining Nut 35 (4.0)
Upper Timing Belt Cover Bolt 80 (9.0)