Power Window Switch Continuity Test (Back Door/Tailgate)
Using ohmmeter, check continuity between specified terminals with back door/tailgate power window switch in specified position. See the POWER WINDOW SWITCH CONTINUITY TEST TABLE (BACK DOOR/TAILGATE) . See Fig 1. If continuity does not exist at specified terminals, replace appropriate power window switch.
POWER WINDOW SWITCH CONTINUITY TEST (BACK DOOR/TAILGATE)
| Application & Position | (1) Terminal No. | ||
|---|---|---|---|
| UP | 3 & 6 | ||
| OFF | None | ||
| DOWN | 3 & 5 | ||
| Switch Illumination (UP, OFF & DOWN) | 1 & 2 | ||
|
|||