LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1996 >> Tacoma SR5, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - 3.4L >> Relays >> EFI Main Relay

EFI Main Relay

NOTE: EFI main relay may also be referred to as EFI relay.
  1. Ensure ignition is off. Remove EFI main relay from fuse/relay box located near driver's side front corner of engine compartment, near battery.
  2. To test EFI main relay continuity, using ohmmeter, check continuity between specified terminals. See Fig 1 and Fig 2.
  3. To test EFI main relay operation, apply battery voltage and ground to relay and use ohmmeter to check continuity between specified terminals. See Fig 1 and Fig 2. Replace EFI main relay if defective.
Fig 1: Testing EFI Main Relay - Checking Continuity
G95F32479Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Testing EFI Main Relay - Checking Operation
G95I32480Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals