Engine Controls - Specifications - 3.4L V6: Capacities
CAUTION:
Some transaxles require that differential be filled separately from transaxle. A separate quantity of lubricant is required for differential. See FLUID CAPACITIES
table.
FLUID CAPACITIES
| Application | (1) Quantity | ||||||
|---|---|---|---|---|---|---|---|
| Crankcase (Includes Filter) | |||||||
| 2WD | 5.7 Qts. (5.4L) | ||||||
| 4WD | 5.5 Qts. (5.2L) | ||||||
| Cooling System (Includes Heater) | |||||||
| 2WD | |||||||
| A/T | 10.5 Qts. (9.9L) | ||||||
| M/T | 10.7 Qts. (10.1L) | ||||||
| 4WD | |||||||
| A/T | 10.5 Qts. (9.9L) | ||||||
| M/T | 10.7 Qts. (10.1L) | ||||||
| Manual Transmission (SAE 75W-90/API GL-5) | |||||||
| 2WD | 2.7 Qts. (2.6L) | ||||||
| 4WD | 2.3 Qts. (2.2L) | ||||||
| Automatic Transmission (Dexron-II) | |||||||
| 2WD | |||||||
| Dry Refill | 7.6 Qts. (7.2L) | ||||||
| Drain & Refill | 1.7 Qts. (1.6L) | ||||||
| 4WD | |||||||
| Dry Refill | 10.5 Qts. (9.9L) | ||||||
| Drain & Refill | 2.1 Qts. (2.0L) | ||||||
| Differential | |||||||
| 2WD (SAE 80W-90/API GL-5) | 2.7 Qts. (2.6L) | ||||||
| 4WD | |||||||
| Front Axle | |||||||
| With Automatic Disconnecting Differential (SAE 75W-90/API GL-5) | 1.3 Qts. (1.2L) | ||||||
| Without Automatic Disconnecting Differential (SAE 80W-90/API GL-5) | 1.2 Qts. (1.1L) | ||||||
| Rear Axle (SAE 80W-90/API GL-5) | |||||||
| Short Wheel Base | |||||||
| With Rear Differential Lock System | 2.8 Qts. (2.7L) | ||||||
| Without Rear Differential Lock System | 2.7 Qts. (2.6L) | ||||||
| Long Wheel Base | 2.2 Qts. (2.1L) | ||||||
| Transfer Case (SAE 75W-90/API GL-5) | 1.1 Qts. (1.0L) | ||||||
|
|||||||