Park/Neutral Switch Continuity Check
Disconnect electrical connector from park/neutral switch at transmission or transaxle. Using ohmmeter, check for continuity at specified terminals with gearshift in proper positions. See Fig 1. See PARK/NEUTRAL SWITCH CONTINUITY SPECIFICATIONS table. Replace switch if defective.
PARK/NEUTRAL SWITCH CONTINUITY SPECIFICATIONS
| Gearshift Position | Continuity Between Terminals |
|---|---|
| Park | 5 & 6, 2 & 7 |
| Reverse | 2 & 8 |
| Neutral | 5 & 6, 2 & 9 |
| Drive | 2 & 10 |
| 2 | 2 & 3 |
| Low | 2 & 4 |