LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1996 >> Previa LE, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Anti-Lock Brake System) >> Component Testing >> Anti-Lock Brake System >> Front Speed Sensors

Front Speed Sensors

WARNING: This page is about a different car, the 1996 Toyota Tercel, 1996 Toyota Paseo, 1995 Toyota Tercel, and 1995 Toyota Paseo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove harness connector clamp. Unplug connector from front wheel speed sensor. Measure resistance between speed sensor terminals. Resistance should be 920-1220 ohms.
  2. Measure continuity between each sensor terminal and sensor body. Continuity should not exist. If resistance and continuity are not as specified, replace speed sensor. Inspect sensor rotor teeth for scratches, cracks, warping, or missing teeth.
scientia non olet · About LEMON Manuals