LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1996 >> Previa DX, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Component Testing >> Abs Ecu Wiring Harness

Abs Ecu Wiring Harness

  1. Remove ABS ECU. See ABS ECU under REMOVAL & INSTALLATION . With ABS ECU connectors attached, backprobe ABS ECU connector terminals. using a DVOM, measure voltage and continuity between indicated terminal and body ground. See Figure. If any circuit value is not as specified, check and repair or replace indicated trouble part.
  2. Unplug ABS ECU connectors. Check resistance and continuity, on wire harness side, between indicated terminals and body ground of ABS ECU connector. See Figure. If any circuit value is not as specified, check and repair or replace indicated troubled part.
scientia non olet · About LEMON Manuals